Skip to content

Order types

By Investor Wisdom Daily Team·

Three hypothetical investors, Ana, Ben and Chloe, each decide to buy the same stock on the same morning. Ana taps “buy at market” and pays a few cents more than the price she saw. Ben sets a maximum price and never gets his shares because the price rose. Chloe protects an older position with a “stop” at $48, wakes up to bad news and finds she sold at $42. None of them made an error in the app. Each simply chose an order type without knowing what it promises and what it gives up.

An order is an instruction to your broker: buy or sell, how many shares, and under what conditions. Every order type is a trade-off between two things you would like but cannot both be sure of: getting the trade done and getting a particular price. A market order prioritises the first, a limit order the second, and stop orders add a trigger that decides when the order becomes active. Two more terms matter: slippage, the difference between the price you expected and the price you got, and a gap, a jump in price between one trade and the next, often overnight.

A market order says “buy (or sell) now at the best price available”. FINRA describes it as the order type that “provides the most certainty that your order will be executed because it’s not tied to any restrictions” (FINRA, order types). It almost always fills, but you do not control the price. In a fast or thinly traded market, the price you get can be noticeably worse than the last price you saw. That difference is slippage.

Ana sees a last price of $25.00 and places a market order for 200 shares, expecting to pay 200 × $25.00 = $5,000. Sellers at $25.00 have only a few shares, so her order works through higher asks and fills at an average of $25.06.

  1. Actual cost: 200 × $25.06 = $5,012.
  2. Slippage: $5,012 − $5,000 = $12, or $0.06 a share.
  3. As a share of the expected cost: $12 ÷ $5,000 = 0.24%.

Small on one trade; less small if it happens every week.

A limit order sets the worst price you accept: a buy limit at $50 fills only at $50 or lower; a sell limit at $60 fills only at $60 or higher. FINRA puts the buy side this way: “A buy limit order can be executed only at or below the limit price.” You control the price, but the order may not fill at all if the market never reaches your limit.

Worked example 2: Ben’s limit order, two endings

Section titled “Worked example 2: Ben’s limit order, two endings”

Ben places a buy limit for 100 shares at $50, so he will pay at most 100 × $50 = $5,000.

  • Ending A: the stock dips to $49.95 and his order fills there. He pays 100 × $49.95 = $4,995, a little under his limit.
  • Ending B: the stock trades between $50.40 and $51.20 all day. His order never fills. He paid nothing, but he also owns nothing.

Limit orders also have a time setting. FINRA describes “day orders, which expire at the end of the trading day if they aren’t executed,” and “good ’til canceled orders, which remain in effect until they’re executed by the brokerage firm or canceled by the customer.” Check your broker’s terms for how long it keeps good-’til-canceled orders open.

A stop order waits until the price reaches or passes the stop (trigger) price, usually based on a trade, then becomes a market order. In FINRA’s words, “When this stop price is reached, the order automatically turns into a market order.” Some brokers offer versions triggered by quotes instead of trades, so check your broker’s terms. Investors often place a sell stop below their buying price to limit a loss. Because it becomes a market order, a stop does not guarantee the trigger price.

A stop-limit order becomes a limit order when the trigger is reached. FINRA describes it as an order in which “your stop order is designed to trigger the activation of a limit order.” It protects you from a very poor fill, but in a sharp fall it may not fill at all, leaving you holding the position.

A stock can open far from where it closed the day before, after news overnight. This jump is a gap. Stops limit losses in normal conditions; they cannot promise a maximum loss.

Worked example 3: Chloe’s stop meets a gap

Section titled “Worked example 3: Chloe’s stop meets a gap”

Chloe bought 100 shares at $55, costing 100 × $55 = $5,500. She sets a sell stop at $48, expecting her worst case to be a loss of ($55 − $48) × 100 = $700. The stock closes at $50. Overnight the company cuts its forecast, and the stock opens at $42.

  • With a stop order: $42 is below $48, so the stop triggers at the open and becomes a market order. It fills near $42, not $48. Her loss is ($55 − $42) × 100 = $1,300, nearly double what she planned for.
  • With a stop-limit at $48 (limit $47.50): the trigger is hit, but the limit order cannot fill when the stock trades at $42. She still holds 100 shares worth 100 × $42 = $4,200, down $1,300 on paper, and the stock may keep falling or recover.
Outcome for Chloe Planned Stop order after the gap Stop-limit after the gap
Sale price $48 about $42 no sale
Result on $5,500 −12.73% ($4,800) −23.64% ($4,200), realised still holding, −23.64% on paper

The gap cost her $6 a share ($48 − $42) beyond her stop. Neither order type could stop a price that jumped past it.

For example, a rule might place a limit order for the next session at the previous close plus 1%. If the stock closed at $80, the limit is $80 × 1.01 = $80.80. That buffer gives the order a good chance to fill, while the limit stops it from chasing a stock that has jumped far above the price the rules looked at. If the stock opens at $83.20, 4% higher, the order simply does not fill, which is often what the rule’s designer wants.

Order type You control You risk
Market Getting it done The price
Limit The price Not filling
Stop When it triggers The fill price after the trigger
Stop-limit Trigger and price Not filling in a fast move

Use the investment return calculator to see Chloe’s gap as a return. Enter a starting investment of 5500, nothing added per month, 1 year and a final value of 4200. Notice a loss of about 23.6%. Then change the final value to 4800, the sale she planned, and compare: about −12.7%. The gap between those two numbers is the risk a stop order cannot remove.

  • Thinking a stop guarantees the stop price. A stop becomes a market order once triggered. After a gap, the fill can be far below the trigger.
  • Using market orders on thinly traded stocks. With few shares on offer, a market order can walk up the asks and fill well above the last price. A limit order caps what you pay.
  • Setting a limit and forgetting it. A good-’til-canceled order can fill weeks later, when the reason you placed it no longer applies.
  • Placing a stop very close to the current price. Ordinary daily price swings can trigger it and sell the position even when nothing has changed about the company.
  • Assuming a stop-limit is strictly safer. It avoids a terrible fill but can leave you holding a falling stock with no sale at all.
  • The order ticket in a broker app asks for exactly the choices in this lesson: order type (market, limit, stop, stop-limit), price or prices, quantity and time in force (day or good-’til-canceled).
  • Regulator guidance: FINRA’s order types page (opened 19 November 2026) and its note on stop orders in volatile markets explain the same trade-offs, including that a stop’s execution price can differ from the stop price.
  • Trade confirmations show the price you actually got. Comparing it with the quote you saw is how you measure your own slippage.
  1. You place a market order for 400 shares when the last price is $30.00, and it fills at an average of $30.15. How much slippage did you pay?
Show the answer to question 1

$60: ($30.15 − $30.00) × 400 = $60.

  1. You own 50 shares bought at $40 with a sell stop at $36. The stock gaps down and opens at $31. Roughly what is your loss, and what loss did you plan for?
Show the answer to question 2

About $450 (($40 − $31) × 50), against a planned $200 (($40 − $36) × 50). The stop became a market order and filled near the open.

  1. Which order type gives you the most certainty of getting the trade done?
Show the answer to question 3

A market order. It has no price condition, so it fills at the best available price, but that price is not guaranteed.

  1. A buy limit at $50 is placed, and the stock never trades below $50.40 that day. What happens to a day order?
Show the answer to question 4

It does not fill and expires at the end of the trading day. You keep your cash and own no shares.

  • Market orders trade the certainty of a fill for uncertainty about price; limit orders do the reverse.
  • Stops help limit losses but can fill well past the trigger after a gap; stop-limits may not fill at all.
  • Day orders expire at the close; good-’til-canceled orders stay live until filled or cancelled.
  • Slippage, like the bid-ask spread covered in How markets work, is a cost that grows the more often you trade.

Key terms

For educational purposes only. This material does not provide investment advice.