Credit utilization
By Investor Wisdom Daily Team·
Paid in full, but the report shows a balance
Section titled “Paid in full, but the report shows a balance”Lena, a hypothetical 23-year-old, pays her card in full every month and never pays interest. Then she looks at her credit report and sees a balance of $1,500 on that card. She is sure she owes nothing. Is the report wrong?
Probably not. This lesson explains credit utilization, how it is worked out for one card and for all cards together, and why the balance on a report is usually the one from the last statement, not what is owed today. All people, limits and balances in the examples are hypothetical.
The idea in one paragraph
Section titled “The idea in one paragraph”Credit utilization is the share of your available revolving credit that you are using. Revolving credit is credit you can borrow, repay and borrow again up to a credit limit, such as a credit card. Utilization is a balance divided by a limit, shown as a percentage. myFICO describes it as the percentage of available credit on revolving accounts that is in use, and places it within the “amounts owed” category, about which it says “Amounts owed on accounts determines 30% of a FICO® Score” (myFICO, as of November 2026). It can be looked at card by card (per-card utilization) and for all cards together (overall utilization). For how this category fits with the others, see What goes into a credit score.
The formula is the same either way:
Utilization = balance ÷ credit limit × 100
For overall utilization, add up all the balances and all the limits first, then divide.
Example 1: three cards, per card and overall
Section titled “Example 1: three cards, per card and overall”Lena has three hypothetical cards. Their statement balances and limits are:
| Card | Statement balance | Credit limit | Per-card utilization |
|---|---|---|---|
| A | $600 | $2,000 | $600 ÷ $2,000 = 30% |
| B | $250 | $5,000 | $250 ÷ $5,000 = 5% |
| C | $0 | $3,000 | $0 ÷ $3,000 = 0% |
| All | $850 | $10,000 | $850 ÷ $10,000 = 8.5% |
Step by step for the total row:
- Total balances: $600 + $250 + $0 = $850
- Total limits: $2,000 + $5,000 + $3,000 = $10,000
- Overall utilization: $850 ÷ $10,000 × 100 = 8.5%
Notice that overall utilization is not the average of the three percentages. The average of 30%, 5% and 0% is about 11.7%, but cards with bigger limits count for more when you add dollars first. Card A is at 30% on its own while the total sits at 8.5%; a model can look at both views.
Example 2: why the statement date matters
Section titled “Example 2: why the statement date matters”Each card has a statement closing date, the last day of a billing cycle. On that date the issuer produces a statement showing the balance. myFICO notes: “The total balance on your last statement is generally the amount that will show in your credit report.” It adds: “Note that even if you pay off your credit cards in full each month, your credit report may show a balance on those cards.” (myFICO, as of November 2026.) This is Lena’s situation.
Say her card has a $3,000 limit and she charges $1,500 over the month:
| Scenario | Balance on the statement | Utilization reported |
|---|---|---|
| She pays in full after the statement, by the due date | $1,500 | $1,500 ÷ $3,000 = 50% |
| She pays $1,200 before the closing date, rest by due date | $1,500 − $1,200 = $300 | $300 ÷ $3,000 = 10% |
In both cases she pays no interest, assuming her card has a grace period and she pays the full statement balance by the due date (see Grace periods and minimum payments). The money spent is the same. What differs is the balance on the statement, and so the figure that is generally reported. Exactly when each issuer reports to each bureau is set by the issuer and can vary, so treat the statement closing date as the usual pattern, not a guarantee.
Example 3: what closing a card or a limit cut does
Section titled “Example 3: what closing a card or a limit cut does”Utilization has two parts, and the limit can change as well as the balance. Go back to Lena’s three cards from Example 1, with $850 owed on $10,000 of limits.
Closing card C (balance $0, limit $3,000). Her balances do not change, but her total limit does:
- New total limit: $10,000 − $3,000 = $7,000
- New overall utilization: $850 ÷ $7,000 × 100 ≈ 12.14%
Her overall utilization rose from 8.5% to about 12.14% without spending a dollar more.
Closing card A instead, after paying it off (limit $2,000):
- New total limit: $10,000 − $2,000 = $8,000
- Remaining balance: card B’s $250
- New overall utilization: $250 ÷ $8,000 × 100 = 3.125%
Here utilization fell, because the balance went to zero before the card closed.
A limit cut. Suppose the issuer lowers card A’s limit from $2,000 to $1,000. Card A’s per-card utilization becomes $600 ÷ $1,000 = 60%, and the total limit falls by $2,000 − $1,000 = $1,000 to $9,000, so overall utilization becomes $850 ÷ $9,000 ≈ 9.44%.
| Change | Total balance | Total limit | Overall utilization |
|---|---|---|---|
| Starting point | $850 | $10,000 | 8.5% |
| Close card C ($0 balance) | $850 | $7,000 | ≈ 12.14% |
| Pay off and close card A | $250 | $8,000 | 3.125% |
| Card A limit cut to $1,000 | $850 | $9,000 | ≈ 9.44% |
These are arithmetic results, not predictions of a score change: closing an account can also affect other categories, such as the length of credit history, and how a model weighs each effect is not published.
What about utilization targets?
Section titled “What about utilization targets?”If you have come across a specific percentage target for utilization, check where it comes from. The myFICO page used here gives no such threshold: its 30% figure is the weight of the whole amounts-owed category, not a utilization target. It does say that “In some cases, a low credit utilization ratio will have a more positive impact on your FICO Scores” than not using any available credit at all. We do not repeat any target number in this lesson because we did not find one in the scoring company’s or the regulator’s pages we opened. The arithmetic above lets you see where any balance would put you.
Try it
Section titled “Try it”There is no utilization calculator on this site yet, so try it on paper. Take two hypothetical cards: one with a $1,500 limit and a $450 balance, another with a $4,000 limit and a $200 balance.
- Card 1: $450 ÷ $1,500 × 100 = 30%
- Card 2: $200 ÷ $4,000 × 100 = 5%
- Overall: ($450 + $200) ÷ ($1,500 + $4,000) × 100 ≈ 11.82%
Then repeat it with your own statements: the balance and the limit are printed on each one. Notice which card’s percentage is highest on its own, and how much smaller the overall figure is when one card has a large limit.
Common mistakes
Section titled “Common mistakes”- Averaging the percentages. Overall utilization adds balances and limits first; averaging per-card percentages gives a different number, about 11.7% instead of 8.5% in Example 1.
- Assuming paying in full means a $0 report. The balance on the last statement is generally what is reported, even if it is paid by the due date.
- Forgetting that limits move. A closed card or a lower limit raises utilization on the same balances.
- Counting installment loans. Utilization is about revolving credit such as cards; a car loan or student loan is a different kind of account.
- Treating a target as a rule. We found no threshold in the myFICO or CFPB pages used here; the CFPB notes that scores vary by model.
Real-world context
Section titled “Real-world context”The two numbers you need are on every card statement: the statement balance (sometimes “new balance”) and the credit limit, along with the statement closing date. A credit report shows, for each card, a reported balance and limit as of a reporting date. Comparing the two documents shows whether the report reflects your last statement. Everything here about reporting comes from myFICO’s description, as of November 2026.
Quick check
Section titled “Quick check”- A card has a $1,600 limit and a $400 statement balance. What is its utilization?
Show the answer to question 1
25%, because $400 ÷ $1,600 × 100 = 25%.
- Add a second card with a $3,400 limit and a $100 balance. What is overall utilization?
Show the answer to question 2
10%, because ($400 + $100) ÷ ($1,600 + $3,400) × 100 = $500 ÷ $5,000 × 100 = 10%.
- The first card’s $400 balance is moved to the second card, and the first card is then closed. What is overall utilization now?
Show the answer to question 3
About 14.71%, because the total balance is still $500 but the only limit is $3,400: $500 ÷ $3,400 × 100 ≈ 14.71%.
- You pay in full every month. Why can your report still show a balance?
Show the answer to question 4
Because the balance on the last statement is generally what is reported, and it is shown before the payment that clears it.
Key takeaways
Section titled “Key takeaways”- Utilization is balance ÷ limit, per card and overall; for overall, add dollars first.
- myFICO says the balance on your last statement is generally what shows on your report.
- Closing a card or a limit cut raises utilization on the same balances; paying a card off before closing it can lower it.
- No utilization target appears in the myFICO or CFPB pages used here, so this lesson gives none.
Next steps
Section titled “Next steps”- What goes into a credit score: where utilization fits among the categories.
- Grace periods and minimum payments: paying the statement balance and what minimum payments cost.
For educational purposes only. This material does not provide investment advice.